QuickLINK® XF Universal Adapter

PRINT

BACK

The QuickLINK® XF Universal Adapter (Mating Sleeve) is designed to unite fiberoptic connectors, cable assemblies and jumper cables with different ferrules (1.25mm and 2.5mm ferrules) together for test and measurement, emergency restoration and experimental purposes.

The patented universal interface allows the flexibility to mate various types of connectors with 2.5mm and 1.25mm ferrules regardless of the outer housing for quick or long term connections. The Selective Retention (SR) feature incorporates an adjustable LiteLOCK® dial on each end which allows the user, if required, to increase the tension around the ferrules to secure the two mated connectors together. To use, simply insert the appropriate ferrule size (1.25mm or 2.5mm) of the connector into the QuickLINK® XF. The smaller diameter side of the adaptor accepts the 1.25mm ferrules. If you would like to secure the connectors in place, rotate the LiteLOCK® dials on each end of the adaptor clockwise (to the right). To remove the connectors, simply rotate the LiteLOCK® dials counter clockwise (to the left) and pull the connectors out

Article from Fiber Plus

List of all articles from this supplier

- Panel Adapters
- Universal Detector Port
- QuickLINK® Universal LiteLOCK® Adapter
- Bare Fiber Adapter Kit

List of all articles from this supplier

List of articles in this sub-category

- RF Components
- Fiber Optics cables for data transfer
- Focal Plane Arrays
- InGaAs Linear Photodiode Arrays
- LE-series linear InGaAs photodiode arrays
- Fiber optic terminators

List of all articles in this sub-category Fiber optic components

List of all articles in this sub-categoryList of all articles in this sub-categoryList of all articles in this sub-category