|
Category : Measurement, test and control instrumentations > Dimensional measurements 2D/3D
Real time inspection of laser butt-welded seams
|
|
 |
| PRINT |
|
 |
| BACK |
|
On-board sensor for laser butt-welding machines.
WeldInspector is for mounting just behind the welding head. It checks in real time the quality of the welded seam, namely: - the lateral position of the welded seam - the width of the welded seam - the small-scale fluctuations of the width of the welded seam.
Also detects beads and holes. Works step below as well as step above.
One mode of use consists in launching an inspection while performing a welding cycle at low power, which provides in few seconds a check both of the focus and of the alignment of the laser with respect to the joint.
You may want to consider this system if you need to ... • Certify the quality of 100% of the welded parts. • Instantly detect any anomaly during welding. • Be able to check rapidly and at any moment whether the laser beam is aligned with respect to the joint.
WeldInspector complies to the robustness and reliability required by the automotive industry.
List of all articles from this supplier
- New robot for inspecting tapped holes
- 2d dimensional measurements in the shop
- On-the-fly inspection of filter openings
- Brillo, on-line optical control of sheens and roughnesses
- Diffuso, vision system for detecting small defects on smooth surfaces
- Recta-Profile, control of the straightness, squareness and quality of cut edges.
List of all articles from this supplier
List of articles in this sub-category
- Gage & Gage-Plus Coordinate Measuring Machines
- Sprint CNC Measurement system
- LMS 6045 Length Gauge
- 3 axis automatic with laser models
- 3D measurements in micro- and nanometrology
- Talysurf CLI Systems for non contact 3D measurement
List
of all articles in this sub-category Dimensional measurements 2D/3D
List of all articles in this sub-categoryList of all articles in this sub-categoryList of all articles in this sub-category
|