Category : Instrumentations for fluid management, control and transfer (gas and liquids) > Level sensors, detection & measurement

PRINT

BACK

-with integrated Z10 cable break monitoring unit

-with electrode rods made of stainless steel 316 Ti

For signalling the presence of an electrically conductive liquid caused, for example by burst
pipes.

If the two non-insulated electrode rod sensor surfaces of a rod electrode come into contact
with an electrically conductive liquid (e.g. water, acid etc.), an electrical contact is made and
an alarm signal given.

Available electrode rods: 4 mm dia. made of:
- stainless steel 316 Ti
- titanium
- Hastelloy C
- Hastelloy B
- Monel
- tantalum
covered with shrinkdown tubing made of:
- polyolefine or
- PVDF or
- PTFE
Control electrode 1
Earth electrode 1
Electrode rod material stainless steel 316 Ti
Diameter of the electrode rods 4 mm
Electrode rods length max. approx. 2,500 mm
Shrinkdown tubing polyolefin
Screw-in nippel material PVDF
Screw-in nippel dimension G1
Mounting orientation vertical
Housing PP with M 20 x 1.5 cable entry,
protection class IP 54

Temperature resistance - 20° C to + 60° C

List of all articles from this supplier

- Electrode relay for level control
- Rod electrode for use in potentially explosive atmospheres
- SDS/PP for the automatic control of non-aggressive liquids
- Contact protection relay for signalling a limit level

List of all articles from this supplier

List of articles in this sub-category

- Enhanced Jupiter® Magnetostrictive Level Transmitters
- Atlas™ Magnetic Level Indicator
- Model T10 Float Level Switch
- Model B73 Sealed External Cage Liquid Level Switches
- Top Mounting Displacer
- APM Pneumatic Modulevel For Boiler Feed Systems

List of all articles in this sub-category Level sensors, detection & measurement

List of all articles in this sub-categoryList of all articles in this sub-categoryList of all articles in this sub-category