Category : Instrumentations for fluid management, control and transfer (gas and liquids) > Level sensors, detection & measurement

PRINT

BACK

EL/0/SB-1/G1/3/ED/ED/0/Ex

-with electrode rods made of stainless steel, 4 mm dia.
with G1 screw-in nipple made of stainless steel

For use in intrinsically safe circuits in potentially explosive atmospheres in categories
Zone 1 or 2.

EC type examination certificate: INERIS 03ATEX0152

Electrode rod(s): stainless steel 316 Ti, 4 mm dia.,
covered with max. 300 mm shrinkdown tubing made of PVDF

Control electrode 2
Earth electrode 1
Electrode rod material stainless steel 316 Ti
Diameter of the electrode rods 4 mm
Electrode rods length max. approx. 2,500 mm
Insulator 2 cast resin
Shrinkdown tubing PVDF
Screw-in nipple material stainless steel 316 Ti
Screw-in nipple dimension G1
Housing made of glass fibre and graphite reinforced polyester,
A 301, 110 x 75 x 55 mm, protection class IP 65

Mounting orientation vertical
Mounting from the top
Temperature resistance - 20° C to + 60° C
Pressure resistance for pressureless applications only

List of all articles from this supplier

- Electrode relay for level control
- SDS/PP for the automatic control of non-aggressive liquids
- Contact protection relay for signalling a limit level
- Rod electrode for automatic level control

List of all articles from this supplier

List of articles in this sub-category

- Enhanced Jupiter® Magnetostrictive Level Transmitters
- Atlas™ Magnetic Level Indicator
- Model T10 Float Level Switch
- Model B73 Sealed External Cage Liquid Level Switches
- Top Mounting Displacer
- APM Pneumatic Modulevel For Boiler Feed Systems

List of all articles in this sub-category Level sensors, detection & measurement

List of all articles in this sub-categoryList of all articles in this sub-categoryList of all articles in this sub-category