Category : Sensors, probes, transducers > Switches

BUYER'S GUIDE

PRINT

BACK

The T range of Roller Ball Contacts can now be supplied with a choice of contact styles. The switch has an inset ball which, when depressed, operates an internal contact. The switch can be supplied with either a normally closed or normally open contact or changeover contacts which enable the end user to select their preferred contact arrangement.
There is a choice of either 450mm leads or screw terminal connection at the back of the switch enabling easy installation. The switch is supplied with screws and spacer.
The most popular applications are on doors where the swinging or sliding door depresses the roller ball mechanism causing the contact to operate. This design enables the fitting of just one plastic housing causing less potential damage to the door. Also the possibility of tampering is less than with the alternative reed switch/magnet design.

List of all articles from this supplier

- UPB Ultrasonic Sensor
- Paddle Flow Switch
- Dual Axis Clinometer - DAS Model
- Plastice Encased Tilt Switch - TTSMC15
- Inclinometer Sensor - MRI Range
- Small Ultrasonic Distance Sensor

List of all articles from this supplier

List of articles in this sub-category

- Safety Switch without Interlocking NP
- Proximity switches
- 0732 electrolytic switch
- M300 slipswitch speed switch
- Whirligig & magcon speed switches
- Non-contact, coded safety switches PSENcode

List of all articles in this sub-category Switches

List of all articles in this sub-categoryList of all articles in this sub-categoryList of all articles in this sub-category