Category : Automation, process control equipment, industrial communications > Industrial communications equipment

PRINT

BACK

The SMT300Q is a quad site module carrier developed to provide access to a TIM Modules over the CompactPCI bus running at 33MHz with a 32-bit data bus.
The card has an ‘on-board’ JTAG ACT8990 controller. This allows Code Composer Studio and 3L Diamond applications to be used to debug/upload software to Modules.
A single buffered ComPort with conflict protection is available on the chassis front panel. This has the versatility to access any of four com-ports from the Modules.
The main connection to the CompactPCI bus is via the Module’s Global Bus. A single ComPort is mapped to the CompactPCI bus providing support for application boot and data transfer.
A 1 M Byte of SRAM is mapped on to the Global Bus and can be accessed by the Modules as a global resource or by the CompactPCI Bridge.
A 3.3 volt supply is available at the fixing pillars for the Modules. This supply will be taken from the CompactPCI edge connector.
An ‘on-board’ Sundance Digital Bus (SDB) interface to the CompactPCI bridge allows the card to be interfaced to SDB standard modules.
PCI Extensions for Instrumentation (PXI) signals are utilised allow multiple SMT300Q's to be synchronised in a system.

List of all articles from this supplier

- SMT261Q sundance module
- SMT410 PMC Carrier for a single TIM Module
- SMT130 PCI-104 TIM Carrier card
- Diamond DSP Software

List of all articles from this supplier

List of articles in this sub-category

- 386EX processor at 33 MHz
- PC104 STPC VGA graphic controller
- Master BB multidecoder connectable to different interfaces
- SBC PICMG 1.0 for Intel Pentium
- Brios2 powerful fieldbus-based I/O system
- aX 2-Channel Profibus Card

List of all articles in this sub-category Industrial communications equipment

List of all articles in this sub-categoryList of all articles in this sub-categoryList of all articles in this sub-category