Category : Automation, process control equipment, industrial communications > Industrial communications equipment

PRINT

BACK

The SMT410 is a single site module carrier board that provides access to a TIM module over the PCI Mezzanine Card bus.
An on-board JTAG controller allows systems to be debugged using Code Composer Studio. This JTAG controller also has buffered outputs that can be accessed using connectors on the carrier's back panel. This allows off-board devices to be connected into the JTAG chain.

A single buffered ComPort with conflict protection is also available on the chassis back panel. This will have the versatility to access all six ComPorts on the TIM. The main connection to the PCI bus is via the module Global Bus. A single ComPort is also be mapped to the PCI bus providing support for application boot and data transfer.

A 1 MB of SRAM is mapped on to the Global Bus and can be accessed by the TIM as a global resource or by the PCI Bridge. The board requires a 3.3 volt supply that is derived on board and is made available at the fixing pillars for the module.

List of all articles from this supplier

- SMT300Q quad site module carrier
- SMT261Q sundance module
- SMT130 PCI-104 TIM Carrier card
- Diamond DSP Software

List of all articles from this supplier

List of articles in this sub-category

- 386EX processor at 33 MHz
- PC104 STPC VGA graphic controller
- Master BB multidecoder connectable to different interfaces
- SBC PICMG 1.0 for Intel Pentium
- Brios2 powerful fieldbus-based I/O system
- aX 2-Channel Profibus Card

List of all articles in this sub-category Industrial communications equipment

List of all articles in this sub-categoryList of all articles in this sub-categoryList of all articles in this sub-category