Category : Instrumentations for fluid management, control and transfer (gas and liquids) > Pumps

BUYER'S GUIDE

PRINT

BACK

PRINCIPLE:
Driving liquid, which comes in main flow direction out of the nozzle installed in the water-jet pump, is accelerated by the diameter reduction of the nozzle. This acceleration causes low pressure at the suction spigot end sucking liquids or gaseous media.
The suction volume is a function of the driving liquid pressure and the nozzle bore.

Jet pump is used for:
- pumping
- mixing
- vacuum production
- Driving fluid flow is depending on nozzle hole diameter.
- Vacuumed fluid flow is depending on: driving fluid flow jet pump outlet pressure (counter pressure)
- Vacuumed liquide deansity heigh of liquide charge or vacuum
- Vacuum production is depending on driving fluid pressure/flow

USING:
- Jet pump choice must be done from diagram including different uppers data.
- Jet pump is delivered undrilled nozzle. setting must be done successive drilling untill good diameter.
- A set of diagram pressure/hole/flow, for water/water or air /water, is at your disposal.

- From DN10 to DN80
- To pump, mixt and vacuum
- Vacuum untill 3 meters
- Driving fluid: water
- Vacuumed fluid: liquides or gas
- Contruction: PVC - PPH - PVDF

List of all articles from this supplier

- Chlorine controllers developed for swimming pools water measurements
- CDA / CDV SERIES flow indicators
- Measuring systems designed for acid or base concentration measurement
- EchoTREK for ultrasonic level measurement

List of all articles from this supplier

List of articles in this sub-category

- BPS-300 Residual and Utility Pump
- BPS-80 Compact Submersible Pump
- EL single series air pumps
- SLL series air pumps
- MK-10 and MKC-510V air pumps
- Automatic production test system for block pumps

List of all articles in this sub-category Pumps

List of all articles in this sub-categoryList of all articles in this sub-categoryList of all articles in this sub-category