Home
 Products
 Suppliers
 Latest products
 Membership
 News
 Presentation
 Feedback
 Contact

 

NETLINKS
 
 
 
 
 
 

Category : Data Acquisition and signal processing > Amplifiers

SR 1100 amplifier provides time code amplification and distribution

BUYER'S GUIDE
PRINT
BACK



- The SR1100 amplifier provide analog IRIG A, IRIG B, NASA36 or any other format, Time code amplification and distribution. The time codes are based on a 1 kHz (or 10 kHz) amplitude modulated (1/3,1/1) sine-wave carrier.
- The equipment is housing in a 1U rack mount unit.
- On the front face two LED shows the equipment status : the LED « ON » indicate the power supply on. The LED « SIGNAL » indicate the presence of an input code.
Time code amplifier :
- In input the equipment receives an analog signal from an external IRIG A, IRIG B, NASA 36 source.
- When detecting an input signal, the LED « SIGNAL » turns on. The amplified signal is distributed over the 12 outputs of the equipment.

Settings :
Each of the twelve outputs track could be adjusted. These settings are : the gain of each output amplifier, the output signal phase.
-The gain of each amplifier is adjusted by a dedicated potentiometer.
- The output level is independently settled for each type of output.
- The phase could be reversed up to 180° by mean of dedicated truck strap.
- All the input/outputs connectors are located on the rear face of the equipment.
- The power supply uses a fused standard 230V AC connector, CEE compliant, with filter & ONN/OFF switch.
- The analog time code signal connector is a base isolated female BNC. The input circuit impedance is 600 .

Article from MICROSYSTEMES


List of all articles from this supplier

- SR2200 Frequency amplifier & distributor
- XR5000 timeserver designed to synchronise any computer on the network
- The SR1050 is a GPS synchronised universal time code generator
- TimeLink line dedicated to the frequency generation & distribution

List of all articles from this supplier


List of articles in this sub-category

- Model 5105 compact dual-phase lock-in amplifier
- Model 5113 Low-Noise Voltage Preamplifier
- Model 181 preamplifier
- VP 500 patch-clamp amplifier
- RK 400 patch-clamp amplifier
- Video buffer drivers

List of all articles in this sub-category Amplifiers

List of all articles in this sub-categoryList of all articles in this sub-categoryList of all articles in this sub-category