Category : Instrumentations for fluid management, control and transfer (gas and liquids) > Actuators

PRINT

BACK

M.E.A.'s Power Recovery Actuator

Our electro-hydraulic valve Actuator is the product of over twenty years of M.E.A. development in designing and supplying Actuators for refineries, pipeline and power stations. All Actuators are completely assembled, tested and calibrated in our factory. On site they require only physical mounting, motor power, instrument power and control signal connections. There is no connection to in-plant hydraulic lines.
The Split Unit has its Power and Control Assembly separate from its Valve Drive Assembly. The Drive Assembly is mounted on the valve; the Power and Control is mounted remote from the valve. The two units are connected by two hydraulic lines and one elctronic cable.
The Self-Contained Actuator has Hydraulic Power and Control and Valve Drive Assembly mounted and interconnected in one framework and assembly

List of all articles from this supplier

- LE-205 Laser Edge Guiding Systems
- Digital Electric Cylinder
- Plug Valve Actuator
- Slide Valve Actuator

List of all articles from this supplier

List of articles in this sub-category

- Digital Electric Cylinder
- Plug Valve Actuator
- Slide Valve Actuator
- Diverter Valve Actuator
- Turbine Bypass Valve Actuators
- Boiler Fan Damper Actuator

List of all articles in this sub-category Actuators

List of all articles in this sub-categoryList of all articles in this sub-categoryList of all articles in this sub-category