The Centorr Series 16 High Temperature Vacuum or Controlled Atmosphere, Top Loading, Cold Wall, Refractory Metal, Laboratory Furnaces are simple and easy to operate.
A furnace system typically consists of the Basic Furnace Chamber Assembly, the High Vacuum System or Evacuation System, the Process Gas System, the Power Supply, the Temperature Control Instrumentation, and the Furnace Mounting System.
These furnaces are available with Heat Zone sizes from 3" Dia. x 4" High to 14" Dia. x 24" High, and capable of operating 3000°C. It is possible to operate in High Vacuum, in Inter Gas, in Reducing or in Oxidizing Atmospheres. The Vacuum System is capable of attaining 10-6 Torr. The Furnace Chamber may be backfilled to 2 PSIG.
The Furnace is mounted on an open frame with the Vacuum System immediately behind (or to one side) for maximum efficiency. The Power Supply and Control Console are also located as close as possible to the Furnace Chamber. (In the case of small systems the power supply is housed inside the control console.)
The unit is ready to operate as soon as power is connected to the main circuit breaker, and water inlet and drain connections are made.
The Furnace is completely assembled and thoroughly tested prior to shipping; a copy of test results will accompany shipment
A furnace system typically consists of the Basic Furnace Chamber Assembly, the High Vacuum System or Evacuation System, the Process Gas System, the Power Supply, the Temperature Control Instrumentation, and the Furnace Mounting System.
These furnaces are available with Heat Zone sizes from 3" Dia. x 4" High to 14" Dia. x 24" High, and capable of operating 3000°C. It is possible to operate in High Vacuum, in Inter Gas, in Reducing or in Oxidizing Atmospheres. The Vacuum System is capable of attaining 10-6 Torr. The Furnace Chamber may be backfilled to 2 PSIG.
The Furnace is mounted on an open frame with the Vacuum System immediately behind (or to one side) for maximum efficiency. The Power Supply and Control Console are also located as close as possible to the Furnace Chamber. (In the case of small systems the power supply is housed inside the control console.)
The unit is ready to operate as soon as power is connected to the main circuit breaker, and water inlet and drain connections are made.
The Furnace is completely assembled and thoroughly tested prior to shipping; a copy of test results will accompany shipment
The Centorr Series 16 High Temperature Vacuum or Controlled Atmosphere, Top Loading, Cold Wall, Refractory Metal, Laboratory Furnaces are simple and ... >>>Read full article