Category : Instrumentations for fluid management, control and transfer (gas and liquids) > Blending systems

PRINT

BACK

- TO DILUTE
- TO PROPORTION SEVERAL PRODUCTS UNINTERRUPTED
- PRECISION

Mix of bases : catalytic gasoline, low sulphur content, heavy gas oil, BTS, MTS, light bases , cut jet with the additives of the type TLF viscous, cetane, agent lubricating, anti-static viscous or pre diluted, perfume, in the proportions ranging between 1 and 99% of some ppm to 30 m3/h.

Addition from 10 to 50 ppm of anti-static product before fuel jet loading.
Addition of some ppm of perfume and/or other additives to personalize a fuel, flow of about 100 m3/h.

Mix of an additive improving of index of viscosity with a base type 100 neutral in order to facilitate it storage and its handling.
Introduction of about 0,02% of antifoaming pre diluted into an oil solvent, a loop of recirculation assembled on a mixer:50 ppm precision.
Preparation of liquid of cooling starting from bases antifreeze, demineralized water and dye. Flows ranging between 10 and 50 m3/h.

Preparation of pane washes product starting from alcohols, of detergent bases and perfume and dye. Flow ranging between 10 and 15 m3/h.

Specifications:
- All these units are assembled on skid, they can be provided with degasser, of volumeters, mass or electromagnetic flowmeter, of dynamic or static blenders, homogenezers, according to the products to be proportioned and the environment.
- These skids can be manufactured in carbon steel or stainless 316L, to be provided with Viton, Téflon or will kalrez or any other elastomer seals.
- According to the transferred products, they can be built in explosion-proof version, to be traced and insulated if necessary.
- These units can be provided with loop of rinsing, to be drained by blowing with air or nitrogen.

Options:
- Explosion-proof Version.
- Loop of rinsing
- Draining by blowing with air or nitrogen

List of all articles from this supplier

- Piggable valve for volumatic and blending systems
- Positive diplacement pump with pigging ports
- Batch blending processes
- Pumps equipped with rotating impeller

List of all articles from this supplier

List of articles in this sub-category

- Batch blending processes

List of all articles in this sub-category Blending systems

List of all articles in this sub-categoryList of all articles in this sub-categoryList of all articles in this sub-category