Category : Fiber optics components, systems, photonic instrumentation > Fiber optic components

PRINT

BACK

MULTIMODE FIBER OPTICS, INC. certifies the performance of the cable assemblies via helium leak testing by an independent test laboratory. Window and stub assemblies are not certified.
Maximum helium leak rates of 10-11 cm3/sec (torr) are achievable with single fiber cables and 10-9 cm3/sec (torr) with bundled fibers. Operating temperature range is -40° C through +100° C.

The vacuum seals are 2.16" diameter aluminum NW40 flanges or .375" O.D. stainless steel feedthroughs. Other flange types are available upon request.

List of all articles from this supplier

- Fused Silica fibers and PVC monocoil cabling
- LC-10 series collimator assemblies
- Fiber Optic Collimators
- High-Power Laser Transmissions Cables

List of all articles from this supplier

List of articles in this sub-category

- RF Components
- Fiber Optics cables for data transfer
- Focal Plane Arrays
- InGaAs Linear Photodiode Arrays
- LE-series linear InGaAs photodiode arrays
- Fiber optic terminators

List of all articles in this sub-category Fiber optic components

List of all articles in this sub-categoryList of all articles in this sub-categoryList of all articles in this sub-category