Category : Electric DC motor, linear motor, stepper motor, transmission, drives & control, cylinder, gearbox > Stepper motors

PRINT

BACK

Stepper motors are fighting back against the current over-dominance of servo systems and proving that they represent a vibrant, developing technology that is as relevant to industrial design as any alternative.

In the past steppers and servos stood comfortably alongside each other, and users selected which ever was appropriate for the task in hand. But about 10 years ago the big control companies started putting their promotional muscle behind servo systems.

“They naturally like servos because they are used in conjunction with encoders, controllers, PLC and other control equipment, so generate lots of synergistic sales opportunities,” explains Jon Harding of Unimatic Engineers. “And at that time they were able to use the very persuasive sales pitch of saying that servo prices were falling.”

However, what was not said was that stepper prices were falling too, and often the cost of the gearhead and other necessary items were omitted.

“Now we have a situation where many engineers and designers are blinkered into thinking only of servo solutions to what they perceive as precision systems. But in reality 70 percent of applications would be better served with a stepper.”

Unimatic supplies both stepper and servo technologies and tries to fit the more appropriate option for each application. However it is notable that many users will barely consider anything other than a servo.

“Servos are indisputably better for high speed dynamic work,” concedes Harding, “but that represents less than a third of all the jobs I see. If what you actually need is point-to-point motion profiles, steppers will almost always serve you better. And because you don’t need to close the control loop, set up is far easier and faster, cheaper and less prone to working out of synchronisation.”

Harding thinks that he has detected the beginnings of the return swing of the pendulum, with users once again willing to listen when a stepper solution is suggested. He thinks that this may be due in part to having to provide service, maintenance and back up to systems and machines that may have to be exported: steppers are so much simpler that local field engineers are more likely to sort out problems on the spot that to try to call an international helpline.

The purchase price differential is quite apparent, and users are increasingly aware of the additional on-costs relating to servo systems.

“Some of the support technologies like digital signal processing make it very apparent that the supposed advantages of servos are often over-inflated, and when you look at the performance capabilities of today’s high powered steppers you can be left wondering why so many people overlook them in the race to pay for a servo!” Ends For an electronic version of this text and/or picture, please contact Bob Dobson


For more information, please contact:
Trupti Patel, Unimatic Engineers Ltd
Unimatic House, Granville Road, London, NW2 2LN
Tel: 020 8922 1000. Fax: 020 8922 1066.
Email: sales@unimatic.com Website: www.unimatic.com

List of all articles from this supplier

- clean line pillowblocks are self aligning
- Software Package Provides Window Straight Into Work
- Self Clinching Bearing Range Extended
- Rapid prototyping machines builds layer upon layer
- Expanding Possibilities for Miniaturisation

List of all articles from this supplier

List of articles in this sub-category

- SmartShutter Stepper-motor driven shutter
- Integral E stepper motor with a microstepping drive
- Stepper Motors available in standard NEMA sizes
- Hybrid Stepping Motors
- Rotary stepper motors
- Ferrofluidic inertia damper attached to motors shaft

List of all articles in this sub-category Stepper motors

List of all articles in this sub-categoryList of all articles in this sub-categoryList of all articles in this sub-category