Category : Environmental measurement, test and control equipment > Water sampler

PRINT

BACK

Technicap "ball trap" water sampler 

Scientist needs :
- a non- disturbed vertical water sample.
- optimum water flow.
- neutral material.
- functional and easy operating mode.

Technicap offers :
- a non-disturbed vertical water sample.
- optimum water flow.
- neutral material.
- functional and easy operating mode.
Through a compact and lighthandling multisampler system : maximum sample with minimum weight and bulkiness.
Each water sampler is made of a tube blocked up at each end by a sphere acting as a ballvalve.The 2 spheres include a nipple.
Before sampling, the tube is 100% clear, the 2 speres being out of the way of the water flow (A).
External closing system, no internal hindrance.When water sampling is over, the 2 spheres are released and seal the tube (B).
When the "BALL TRAPS" is brought back on deck, the air inlet nipple and the water outlet nipple are properly cleaned (C). Then either air or nitrogen is injected at the upper part and samples water is collected at the bottom part (D).

SOFTWARE DRIVEN MOTOR:
- throught the onboard PC with a user-friendly software.
- choise of sampler´s operating sequence (1,17,24,9...).
- signal confirmation when a sampler closes.
- sequence of sampling stored in memory.

List of all articles from this supplier

- PPS sediments traps for the collection of setting particles
- Volumetric piston pump for outflow control

List of all articles from this supplier

List of articles in this sub-category

List of all articles in this sub-category Water sampler

List of all articles in this sub-categoryList of all articles in this sub-categoryList of all articles in this sub-category