The Batching master : control instrument

PRINT

BACK

The Batching Master is a control instrument, especially designed for the automation of a batch function, where a precise result is required.
The Batching Master as a "stand alone version" is a fully functional device that requires just one power supply.
The operator has all the information that needed for a safe batching process local to the plant.
The batch is started directly at the point filling. If there is a failure in the system, the batch can be stopped immediately. Error messages are displayed in clear text.

Flow meters
All types of flow meters can be connected. The input can be configured for: current input (4 - 20 mA)
passive pulses
inductive sensors
Low flow rate monitoring
If the flow rate during the batch is too low, the Batching Master stops the batch after a pre-programmed time.
Sensor break monitoring
The Batching Master stops the batch if a sensor break with the mA input circuit or with the Namur contact input circuit occurs.

Terminal function

The terminal function is controlled by the serial interface. The host system can send text messages to the display of the Batching Master.
Operator acknowledgements such as confirming plant status, entry of order numbers or selection of a product can be carried out using the keyboard.

Article from krohne

List of all articles from this supplier

- Single loop controller CTR210i
- TTP 200 temperature sensors
- DWM 1000/2000 electromagnetic flowmeters and switches
- OPTIFLUX 1000 electromagnetic flow sensor

List of all articles from this supplier

List of articles in this sub-category

- ControlKING hydraulic valve controller
- Multicont controller for transmiters
- ALP524 electroluminescent digital display
- EMR3 calculator-indicator system
- Single loop controller CTR210i

List of all articles in this sub-category Controllers, counters, digital displays

List of all articles in this sub-categoryList of all articles in this sub-categoryList of all articles in this sub-category