|
Category : Bioscience, biotechnology, life health science (precision equipment, instruments, devices and accessories) > Sample preparation equipment
Tube carrier
The tube carrier is the tube rack, centrifuge rotor and sample storage system in one... Clear-spin® has 2 sizes of tube carrier: 18 place 1.5/2.2ml, 24 place 0.5ml range Tube adaptors for the 24 place rotors accommodate 0.25ml The tube carrier is a flat plastic disc with petals. Each petal accommodates a tube. When the rotor is spinning the petals bend upwards holding the tubes at the same angle as a fixed angle rotor. The pellet is produced at the same point as a fixed angle rotor. The tube carrier load must be balanced - all tube positions need not be filled - just like current rotor technology.
Sample IDs can be written on the flat surface adjacent to the tube. Tubes can remain in the tube carrier throughout all sample manipulations.
In addition: The Clear-spin® tube carrier allows up to 24 tubes to be loaded and unloaded in a single action. A saving in time. The less time to load and unload the more users can share the machine. In student practicals, a class of 20 students each issued with a tube carrier can share a single Clear-spin® at the front of the class. Every time tubes are transferred from rack to rotor the risk of confusion increases. The tube carrier is ideal for labs rigorously controlled by GLP and traceability procedures. 4 or 5 samples can represent a life's work! Traceability is essential and a comfort. Tie this in with the possibility of safely recovering say 4 out of the 5 tubes after 1 has failed in the transparent, removable rotor assembly and the benefit is clear
List of all articles from this supplier
- Clear-spin® rotor
- Stomacher® bags
- Stomacher®3500 for blending large volumes
- Stomacher® 400 circulator laboratory blender
List of all articles from this supplier
List of articles in this sub-category
- Smart Sample Carrier - for laboratories
- Mega-Phor - a submarine electrophoresis unit
- Ultraslice 6000 Precision Saw
- MTEC Sample Punch Suitable for polymers and soft metals
- Fluorolube ideal for preparation of samples
- Cross section polisher : sample preparation device
List
of all articles in this sub-category Sample preparation equipment
List of all articles in this sub-categoryList of all articles in this sub-categoryList of all articles in this sub-category
|