Category : Sensors, probes, transducers > Optical barriers

PRINT

BACK

Laser Optical Barrier:With Separate Transmitter and Receiver. Detection of Hot and Cold Product (CMD)

Application :
The VL/VRG optical barrier resolves all detection problems that may arise in the most diverse types of industry, for example heavy industry (steel), handling and transport.

It is particularly recommended for the following applications:
Working Principle:
The optical barrier VL/VRG is made up of two self-contained units:
- The emitter VL consists of a red laser diode, with optics incorporated, which emits a beam of modulated light towards the receiver.
- The receiver VRG consists of a lens, an optical filter, a photodiode receiver and amplifier circuitry to process the photodiode signal.
The output changes state depending on whether the modulated beam is interrupted or not. Modulating the emission and automatic correction for ambient light in the amplifier circuitry renders the sensor insensitive to ambient light.
Special Features
Intense, highly directive, visible red laser diode emission
- Insensitivity to ambient light
- A jack socket (located under the protective cover at the rear of the receiver) providing an output of signal strength as an aid during alignment
- A LED indicator showing operation of the receiver
- Optional water-cooling jackets for use at ambient temperatures greater than 50°C (flow-rate 2 I/min)

List of all articles from this supplier

- High resolution linear scan camera for non-contact on-line measurement
- Trilas TL laser measurement sensors
- Measurment Systems for Hot Strip Mill: DigiScan XD4000 - DELTA
- Hot Metal Detectors (HMD) : Rota-sonde dc 2000

List of all articles from this supplier

List of articles in this sub-category

List of all articles in this sub-category Optical barriers

List of all articles in this sub-categoryList of all articles in this sub-categoryList of all articles in this sub-category