Category : Cameras, image sensors, imaging systems, scanners, thermography, UV viewers > Image intensifiers

PRINT

BACK

The VS4-1845 Image Intensifier is a high resolution Blue GEN III (OMNI IV) Micro-Channel Plate (MCP) image intensifier optically coupled using high efficiency lenses for use in very low light level imaging. The VS4-1845 is coupled to user's camera through a C-Mount thread.
The output format is adjusted for either a 2/3", 1/2" or 1" format. The use of the special GEN III (OMNI IV) image intensifier in the VS4-1845 results in a response over three times higher at the Blue-Green wavelengths and with 50% higher resolution than other MCP intensifiers.
The intensifier tube is pre-adjusted for high gain and uniform output brightness. An intensifier control module allows full computer control of the gain, gate, and gate delay of the intensifier through a RS-232 (serial port) interface.
The VS4-1845 is designed for use in applications where rigorous quantification of the intensity and location of lower light level objects are required as in scientific applications.

List of all articles from this supplier

- VS4-1845HS image intensifier designed for High-Speed Cameras
- Maxicam3000 Intensified Digital CCD Camera
- Ultracam3 High-Speed Camera
- VS-345EOS image intensifiers

List of all articles from this supplier

List of articles in this sub-category

- Quantum Leap high speed image intensifier system
- VS4-1845HS image intensifier designed for High-Speed Cameras
- VS-345EOS image intensifiers
- UV-ICCD Image intensifier
- Phosphor Screens
- F9800/F9815 series Image Intensifier

List of all articles in this sub-category Image intensifiers

List of all articles in this sub-categoryList of all articles in this sub-categoryList of all articles in this sub-category