Vacuum Degassing Chamber

PRINT

BACK

Vacuum Degassing Chamber

Prevents Failure from Entrapped Gas

Low-cost vacuum chamber

Results in an end product completely free from all air and trapped gases

Replaces plastic or glass desiccating chambers

MV Products vacuum degassing chamber reduces pressure above the surface of the material to permit escape and subsequent removal of entrapped air and other gases that could induce failure of the final product. The rugged Lucite® top provides full visibility of the chamber interior. The system is capable of operating at vacuums up to 29.9" Hg (25 Torr) when used with and adequate vacuum pump.

Available with or without vacuum pump, the MV Products degassing chamber is constructed with Lucite® top, stainless steel tank with pump out port, isolation valve, vent valve, Bourdon vacuum gauge and VISI®TRAP inlet trap to protect the vacuum pump. Accessories include a rotary table, feed thru ports and feed thrus.

Several size "chamber only" systems are also available.

Article from Mass-Vac, Inc.

List of all articles from this supplier

- VisiFlow Oil Filtration System designed to protect vacuum pumps
- MV Visi®Trap Vacuum Inlet Trap with Transparent Sump
- MV Multi-Trap Vacuum Inlet Trap designed to protect oil sealed vacuum pumps

List of all articles from this supplier

List of articles in this sub-category

- Vacuum accessories such as filters and switches
- Vacuum suction cups
- Mounting set for square profiles
- MCH Suction cup holders
- O-Ring Sponge
- Air silencers

List of all articles in this sub-category Vacuum components and systems

List of all articles in this sub-categoryList of all articles in this sub-categoryList of all articles in this sub-category