Category : Measurement, test and control instrumentations > Length measurement systems

BUYER'S GUIDE

PRINT

BACK

The Z-201 A -0 detector head is shown here with optionnal connector Z-214 (not delivered as standard). Pre-soldered cables are available in 2 / 5 or
10 m lengh, with one or two connectors. Z-214 connectors are equally sold separately.
Technical data :
- Power requirement : 10 - 30 VDC
- Current consumption : 80mA max.
- Output circuit : Asymetric push-pull against 0V.
- Output tension 0 : 0V (+0.2 V at no load; +1,5 V max at 10 mA).
- Output tension 1 : 10 to 30 V (Pos. supply -1V at no load; -2.2 V max. at 10 mA).
- Output current : 10 mA min. against + V or 0 V.
- Connection : Waterproof 5 pole Binder connector.
- Cable : 5 x 0,25 mm2, shielded.
- Reading speed : 10 m/s max.
- Housing : Polycarbonate reinforced with fiberglass.
- Protection class : IP 65
- Working temperature : -20 to +60 °C, non-condensing.
- Storage temperature : -40 to +85 °C.
- General immunity : IEC 1131-2
- Protection against static discharges : 1'000 V - 100 pF - 100 ohms.
- Wrong wiring protections : Power supply reversed polarity, short circuit of signal outputs against each other or against 0 V or + V.
- Approbation : As per CE.

List of all articles from this supplier

- Amplifier designed to adapt symmetrical output
- Z-301 AAS -0 high resolution detector for length measurement
- Z-210B : L.C.D. 8 digits mini counter - Meterdrive
- Z-211 A : 6 digits L.E.D. programmable counter with preselection - Meterdrive

List of all articles from this supplier

List of articles in this sub-category

- SP plane-mirror miniature interferometers used for making precision length measurements
- Cable, wire and rope measuring machine
- Surface length measuring machine
- Z-301 AAS -0 high resolution detector for length measurement

List of all articles in this sub-category Length measurement systems

List of all articles in this sub-categoryList of all articles in this sub-categoryList of all articles in this sub-category