Home
 Products
 Suppliers
 Latest products
 Membership
 News
 Presentation
 Feedback
 Contact

 

NETLINKS
 
 
 
 
 
 

Category : Instrumentations for fluid management, control and transfer (gas and liquids) > Gas analysis instrumentation

ZIRCOMAT-P analyzer designed to measure the oxygen concentration

PRINT
BACK



In-Situ "ZIRCOMAT-P" oxygen analyzers

The "ZIRCOMAT-P" analyzer is designed to measure continuously the oxygen concentration in flue gases of boilers and industrial ovens. It is perfectly adapted to the control and to the optimisation of the excess of air in combustion and consequently allows a reduction of the consumption of the fuel (fuel oils, gas, coal...). It consists of a ZRM or ZRY (IP 65 version) microprocessor-based converter and of a ZFK detector.
The converter ZRM is equipped with a LED display for the indication of the measure of oxygen and a LCD display for the configuration of the analyzer. A set of user-friendly menus permits a simple and fast use. The adjustable measuring range, the manual or automatic calibration and blow down, calculation and display of the combustion efficiency are some of the main functions offered the user.
The ZFK detector consists of an element in zirconium, which, thanks to a physico-chemical reaction, allows the measure of the concentration of oxygen. It is directly placed in the flue conduit in contact with the smokes cancelling all problems due to the extraction of a sample and guaranteeing a very short response time. Depending on the applications, several detectors as well as a big variety of convection tube are available.

Article from Fuji Electric France (SA)


List of all articles from this supplier

- Ultrasonic Flowmeter suited for liquid flow measurement
- FCX-AII pressure transmitter for pressure and liquid level measurement
- A2F gas analysis system to measure and control CO, CO2, SO2 and NOx
- New PXR series Temperature micro-controllers

List of all articles from this supplier


List of articles in this sub-category

- Microwelder gas-generating soldering unit
- CT-1530 designed to operate in pressure ranges from 5 to 200 mBar
- Solartron 3098 gas measurement unit
- Gaseous samples mineralisation for sulphur or chlorine analysis
- Continuous measurement of Sulphur and / or Nitrogen in gases
- Portable unit for monitoring air quality

List of all articles in this sub-category Gas analysis instrumentation

List of all articles in this sub-categoryList of all articles in this sub-categoryList of all articles in this sub-category