The new iD Series signal conditioners combine the accuracy of laboratory instrumentation with the performance required by demanding industrial applications. The iD Series signal conditioners are ideal for those applications in Data Acquisition, Test & Measurement, Process Control, and Industrial Automation where accuracy, performance, and reliability are critically important.
The iD Series signal conditioners mount on a 35mm DIN rail, and operate on any voltage between 10-32 Vdc power. (A matching 24 Vdc 850 mA switching power supply is also available.) The devices feature three-way isolation of up to 1800 V between the signal inputs, outputs, and power supply.
The iD series feature seven (7) models designed for each of the most widely measured signal inputs: Process (DC) Voltage and Current; Strain Gage; Thermocouples; RTD’s; AC Voltage; AC Current; Frequency/Pulse.
The iD series devices are designed to work directly with a variety of sensors and transducers; no other components are necessary. For sensors such as RTD’s, strain gages, and some process transducers, precise stable excitation is provided directly from the iD module.
The iD series are available with two different types of signal outputs: Analog or Digital. The iDRN series provides a totally scalable analog output in DC voltage or current. The iDRX series provide a digital RS-485 output. Both iD Series signal conditioners are intelligent microprocessor based instruments that can be scaled and programmed by computer via serial communications, or over an Ethernet network.
1800 Volts 3-Way Isolation
• Input Overvoltage Protection
• 13-Bit Resolution
• 10 or 14 Vdc Excitation @ 20 mA max.
• Software Selectable Scaling and Digital Filtering
• 0.1% Accuracy
• Output: RS-485, 2-Wire (half duplex)
• Input Ranges: Unipolar, 400 mV, 1, 5, 10 Vdc and 20 mA spans
Unipolar/Bipolar 400 mV to 10 Vdc, 0-20 mA dc
11-14 Bit Resolution
±0.1% FS Accuracy
14 Vdc Excitation
1800 V Isolation
250 Vac/1 Min. Input Overvoltage Protection (Voltage Input Only)
Free Setup and Configuration Software
Factory Setup and Configuration Available at No Charge (for iDRN Analog Output models)
